top of page

Mélangeur Roland

50 HD

À télécharger  

Fiche Technique

En savoir pus

Caractéristiques

Dimensions : 

Marque : 

Consommation électrique : 

Poids : 

  • Processing

  • 4:4:4 (RGB), 10-bit
    4:2:2 (Y/Pb/Pr), 10-bit

  • Input Connectors

  • 3G/HD/SD-SDI: BNC type x 4 (INPUT 1--4)
    * Conforms to SMPTE 424M (SMPTE 425M-AB), 292M, 259M-C. HDMI(DVI-D): Type A(19pin) x 4 (INPUT 1--4
    * HDCP Supported.
    Analog RGB/HD-Component: Mini D-sub 15-pin type x 2 (INPUT 1--2)
    Analog Video (SD): Composite (BNC type) x 2 (INPUT 1--2)
    * INPUT 1-2: Select SDI, HDMI or Analog RGB, Composite using menu.
    * INPUT 3-4: Select SDI, HDMI using menu.

  • Output Connectors

  • 3G/HD/SD-SDI: BNC type x 2 (PGM OUT, AUX OUT
    * Conforms to SMPTE 424M (SMPTE 425M-AB), 292M, 259M-C HDMI(DVI-D): Type A(19pin) x 3 (PGM OUT, AUX OUT, MULTI VIEW
    * HDCP Supported Analog RGB/HD-Component: Mini D-sub 15-pin type x 2 (PGM OUT, AUX OUT)

  • Input/Output Level and Impedance

  • Composite: 1.0 Vp-p 75 ohms
    Analog RGB: 0.7 Vp-p 75 ohms (H, V: 5 VTTL)
    Analog HD: 1.0 Vp-p 75 ohms (Sync-Signal: Bi-Level/Tri-Level)

  • SUPPORTED VIDEO FORMATS

  • SDI

  • 480/59.94i, 576/50i, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p
    * Conforms to SMPTE 274M, SMPTE 296M, ITU-R BT.601-5.

  • HDMI:(*2)

  • 480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p 1024×768/60Hz(*1), 1280×720/60Hz(*1), 1280×800/60Hz(*1), 1280×1024/60Hz(*1), 1400×1050/60Hz, 1920x1080/60Hz

  • HDMI(MULTI-VIEW Output):(*2)

  • 1080/59.94p

  • Component

  • 480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i, 1080/50i, 1080/59.94p, 1080/50p

  • RGB:(*2)

  • 1024×768/60Hz(*1), 1280×720/60Hz(*1), 1280×800/60Hz(*1), 1280×1024/60Hz(*1), 1400×1050/60Hz, 1920x1080/60Hz

  • Composite

  • NTSC, PAL

  • *Note

  • *1 Output refresh rate is 75 Hz when frame rate is set to 50 Hz.
    *2 Conforms to CEA-861-E or VESA DMT Version 1.0 Revision 11.
    * The video signal frame rate must match the unit's frame rate setting.
    * The output format of HDMI and RGB/Component is always the same.
    When a Video format is selected, component signal is output from the RGB/COMPONENT connector.
    When a RGB format is selected, RGB signal is output from the RGB/COMPONENT connector.

  • USB-VIDEO

  • 480/29.97p, 576/25p, 480/59.94p, 576/50p, 720/29.97p, 720/25p, 720/59.94p, 720/50p, 1080/29.97p, 1080/25p, 1080/59.94p, 1080/50p

  • Still Image

  • Windows(R) Bitmap File (.bmp)
    * Maximum 1920 x 1080 pixels, 24-bit per pixel, uncompressed.

  • Effects

  • Transition: Mix, Cut, Wipe (9 patterns)
    Composition: PinP, Chrominance Key, Luminance Key
    Others: Output Fade, Output Freeze, User Logo

  • AUDIO

  • Audio Processing

  • Sampling Rate: 24-bit/48 kHz

  • Input Connectors

  • AUDIO IN (1 to 4) jacks (XLR/TRS combo type)
    * XLR type: 1 GND, 2 HOT, 3 COLD
    * Phantom Power: DC 48 V (unloaded maximum), 5 mA (maximum load) (Current value per channel).
    AUDIO IN (5 to 8) jacks (RCA phono type)
    AUDIO IN (9 to 12) jacks (TRS type)

  • Output Connectors

  • AUDIO OUT L,R jacks (XLR-3-32 type)
    * XLR type: 1 GND, 2 HOT, 3 COLD
    AUDIO OUT L,R jacks (RCA phono type)
    PHONES jack (Stereo 1/4-inch phone type) (headphones)
    PHONES jack (Stereo miniature type) (headphones)

  • Input Level and Impedance

  • XLR/TRS: -68 to +4 dBu (Maximum: +22 dBu, 4 k ohms)
    RCA phono: -10 dBu (Maximum: +8 dBu, 11 k ohms)
    TRS: +4 dBu (Maximum: +22 dBu, 98 k ohms)

  • Output Level and Impedance

  • XLR: +22 dBu (Maximum: +22 dBu, 600 ohms)
    RCA phono: -10 dBu (Maximum: +8 dBu, 1 k ohms)
    Headphones: 25 mW + 25 mW, 20 ohms

  • Audio Formats

  • SDI: Linear PCM, 24bit, 48kHz, 2ch
    * SMPTE 299M, SMPTE 272M-C
    HDMI: Linear PCM, 24bit, 48kHz, 2ch
    USB-AUDIO: Linear PCM, 16bit, 48kHz, 2ch

  • Audio Effects

  • Channel Effects: Compressor, Noise Gate, 3-Band EQ, Delay
    Master Effects: Mastering, 3-Band EQ, Reverb

  • OTHERS

  • Remote

  • Remote MIDI: 5 pin DIN type (IN, OUT/THRU)
    RS-232C: D-sub 9 pin type x 1

  • USB Interface

  • USB2.0 port(host): Hi-Speed USB: Type A (for USB memory)
    USB3.0 port(device): Type B for USB-VIDEO (Super-Speed/Hi-Speed), USB-AUDIO (Full-Speed)
    - Uncompressed Video   4:2:2 (Y/Pb/Pr), 8-bit
    - Bit-rate: max 2Gbit/s (1080/59.94p only active pixels)
    - UVC (USB Video Class) supported uncompressed Video
    - Certified USB3.0 cable is required when running at super-speed (anything at 720p or higher)

  • Display

  • 7 inch Graphic color LCD 800 x 480 dots (touch screen)

  • Power Supply

  • AC Adaptor DC 24V Secondary AC Adaptor DC 9 V to 16 V (XLR-4-32 type)

  • Current Draw

  • 2.5 A (DC 24V)

  • Operation Temperature

  • +0 to +40 degrees Celsius +32 to +104 degrees Fahrenheit

  • Accessories

  • AC Adaptor, Power Cord, Owner's Manual

  • SYSTEM RECOMMENDATIONS FOR RECORDING (VR CAPTURE) OR STREAMING HD MATERIAL

  • Windows

  • 8.0 or higher

  • Mac

  • OS X 10.7 and higher

  • Common

  • Ivy Bridge Core i7 and higher
    8GB Memory or more
    USB 3.0 (supported USB3.0 Intel Chipset e.g. 7Series)
    Note: USB Controller Chip by Renesas (formerly NEC) is not suitable
    Current VR-50HD Streaming Software Compatibility list.

  • SIZE AND WEIGHT

  • Width

  • 434 mm
    17-1/8 inches

  • Depth

  • 306 mm
    12-1/16 inches

  • Height

  • 149 mm
    5-7/8 inches

  • Weight

  • 5.3 kg
    11 lbs. 11 oz.

  • Notes

  • * 0dBu=0.775 Vrms
    * This product is a Class A digital device under FCC part 15.
    * In the interest of product improvement, the specifications and/or appearance of this unit are subject to change without prior notice.
    * This product is intended for use in the following Electromagnetic environments: E1:residential, E2:commercial and light industrial, E3:urban outdoors, E4:controlled EMC environment, ex. recording studio (broadcasting studio) which are specified in EN55103-1 and EN55103-2.

  •  
bottom of page